Unlike other shredders, elastomers are soft glue shredders

When the ordinary plastic pulverizer handles elastomer soft glue materials, it is easy to clump, stick to the knife and screen, and it is not easy to unload; Materials with low hardness will directly clump up when they go down. Materials with higher hardness, after crushing for half an hour, also began to clump and could not be unloaded. In order to solve such boring problems, we can choose to use an elastomer soft glue crusher; Soft rubber material has elasticity, when the cutting angle is not appropriate, ordinary tools are not easy to cut, and soft rubber material is generally hot melting, at high temperature will be a melting state, adhesion occurs. Ordinary hard plastics have high hardness, although they will heat up when crushing, but because they are relatively brittle, they can be crushed by the impact, extrusion and cutting of the tool. Ordinary materials are not easy to melt in the heating environment, so there will be no sticking knife phenomenon. TPU, TPR, TPE, EVA and other elastomer soft adhesive materials, the temperature rises to more than 50 °C, it will stick. The cutting angle of the elastomer soft rubber crusher is the cutting angle designed for soft rubber, which makes the cutting of soft rubber more efficient and labor-saving; At the same time, the speed designed for soft rubber material does not affect the crushing efficiency while cutting off. The tool material used is high hardness steel, decisively shearing soft glue, effectively reducing friction; When in use, the body sandwich layer has a water cooling system, which can effectively reduce the working temperature. In addition, the elastomer soft glue crusher can not only crush the elastomer soft glue materials, but also powder ordinary engineering plastics, and the crushing effect of the material for fiberning is also very good, and the wear resistance of the tool is more than 3 times that of the ordinary crusher.