Precautions for using mold temperature machines | Gu'an machinery manufacturers explained

一、Those things that cannot be done with a mold temperature machine.

1. The oil-carrying mold temperature machine cannot be mixed with the water-carrying mold temperature machine, and the temperature of the machine production design is not the same, and the bad machine is mixed.

2. The oil temperature machine needs to heat the medium oil and cannot add other hydraulic oils
3. The oil temperature machine uses a high temperature explosion-proof pipe of the Tiefolong pipe, instead of other water pipes
4. When the low level alarm, check the water pressure, do not lower the protector, otherwise the alarm will not be reported, and the machine will burn out
5. The water blowing in the mold and piping before the connection oil temperature machine needs to be clean
6. When replenishing the hot oil, it is necessary to confirm that the liquid level is within the upper and lower limits of the oil level gauge, too low will alarm too high to start, or the heat medium oil will flow out and cause danger

Exhaust operation must be performed during the first operation, long downtime, and mold change:

1. First confirm that the machine is installed, the water and electricity are normal, the switches are all open, there is no reverse phase, and the water pressure is insufficient

2. First set the temperature of the mold temperature machine to zero degrees to start the operation;
3. The water type machine can open the outlet to see whether the water is normal, whether the pressure is sufficient, and the valve can be observed and closed.
4. When the pressure shows normal, then heat up to 120 °C, run for 20 minutes, exhaust;
5. After the machine is transported stably, the temperature is adjusted to the constant temperature control within the normal range of production.

如For example, the Gu'an mold temperature machine has an automatic exhaust function, which only needs to be turned on and waited, saving a lot of trouble.

三、How to buy the magic of Gu'an mechanical mold temperature machine

Mold temperature machine was originally used for mold temperature control of a machine, but with the development of the machinery industry, the use of mold temperature machine has become more and more extensive, the current mold temperature machine in plastic molding, die casting, rubber tires, rollers, bonding, sealing and other industries have a great use.

1. Gu'an water mold temperature machine is energy-saving and environmentally friendly, mainly used in the field of low temperature constant temperature
2. Gu'an oil mold temperature machine has strong temperature guarantee, long-lasting temperature conduction, focusing on high temperature constant temperature, roller temperature control and other fields
3, Gu'an cold and hot dual-purpose mold temperature machine, can provide cold water and hot water for the mold temperature at the same time, while meeting the requirements of different temperatures of male and female molds, you say that magic is not magical
4. Gu'an high-temperature mold temperature machine, water type reaches 180 degrees, oil type reaches 320 degrees ultra-high temperature requirements. Easily solve the constant temperature requirements such as die casting, printing, cast rollers, etc
5. Gu'an air-cooled mold temperature machine can solve the constant temperature requirements under the condition of no cooling water source heat dissipation in the workshop.

Gu'an Machinery does what customers think, Nuwu solves the problems in the cold and heat constant temperature system, is used by the majority of customers, improves the quality of the finished mold, reduces the undesirable phenomenon of the finished product, can greatly improve the production efficiency of the finished product and save electricity costs, so that the production cost is reduced and the income is greater.