Shanghai elastomer pulverizer, injection molding machine pulverizer, TPU medium speed pulverizer
It is used in elastomer injection molding machines, shredding and recycling at the edge of the nozzle feeder.
In today's plastics processing industry, new materials or composite materials emerge in an endless stream. Because of their stability, temperature resistance and sealing effect that ordinary plastics cannot provide, the cost of elastomer materials is also much higher than that of ordinary plastics. Suzhou Gu'an Machinery Soft Rubber The special rubber grinder is designed with the most reasonable cutter shaft speed according to the particularity of the elastomer soft material; it is equipped with special-made cutters, and the cutting force is excellent; the cooling water circulation is also installed on the fuselage box to keep the fuselage in the It operates at low temperature to reduce the stickiness of the material, making the material unloading smoother and improving the crushing effect.
Then, why can't ordinary grinders crush these materials? The most common problems are: materials agglomerate, stick to the cutter, stick to the screen, and do not cut the material. Materials with low hardness will directly agglomerate when they go down. Materials with higher hardness will start to agglomerate after being crushed for half an hour, and cannot be unloaded. They cannot be crushed by impact, and can only be cut and crushed by the sharp edge of the tool. At the same time, this kind of plastic is very easy to cause adhesion due to friction and heating. sex. Most of the hot-melt materials are elastomer materials, the more commonly used are TPU, high-purity PP, low-temperature hot-melt adhesive, rubber, etc.
Recycling system of Shanghai elastomer machine-side pulverizer, injection molding machine-side pulverizer, TPU medium-speed machine-side pulverizer
Optional automatic recycling system can fully avoid the waste of manpower and materials, so as to achieve the best recycling effect.
Time-saving: Recycle immediately within 30 seconds, without waiting for centralized crushing, and it is clean and clean;
Improve quality: Nozzle material will be oxidized and humidified (absorbing water) after being taken out at high temperature, and its physical properties will be destroyed. Immediate recovery within 30 seconds can reduce physical strength and reduce the damage of color and gloss;
Save money: Recycling in a short time, avoiding pollution, and the defective rate caused by mixing materials, can reduce the waste and loss of plastic, labor, management, storage, and purchasing funds;
Wide range of uses: suitable for crushing and recycling PU, PVC, PC, ABC and other soft and hard material nozzle materials;
Simple: easy-to-remove design, easy to change color and material, compact and occupy less space, suitable for use next to the machine in a small workshop;
Adopt medium speed motor, low noise and low energy consumption;
Adopt stainless steel feeding hopper design, easy to clean and do not pollute raw materials;
The motor is equipped with an overload protection device and a power supply chain protection system, which is safe and reliable for operation and cleaning;
