Temperature Control Box | Hot Runner Temperature Control Box | Injection Mold Hot Runner Temperature Control Box

Temperature Control Box | Hot Runner Temperature Control Box | Injection Mold Hot Runner Temperature Control Box

一、product description

The temperature control box is a device that continuously maintains the required temperature. It mainly detects the temperature of the heating runner through the intelligent computer chip in the watch core, and then processes the internal data of the intelligent computer to output an appropriate proportional current value, so as to achieve the purpose of temperature control.

It integrates the technical advantages of European and American temperature control boxes and adopts artificial intelligence design. The operator only needs to press the upper and lower keys to set the required temperature, and the rest of the work is automatically completed by the internal computer chip. It is added to the complex mold of the heating system, and the internal automatic control can be called. The setting function enables the thermostat to automatically adjust the parameters that fully match the mold in a short time to achieve perfect control.

Different algorithms are used in different sections of temperature rise, so that the dynamic and steady state can be highly unified. It is especially suitable for high temperature, high heat sensitivity plastic materials, engineering plastics. It meets the requirements of high precision, and the interface is compatible with the international popular card interface. The same, can be used interchangeably. The plug-in temperature control box is available from 1 to 30 points.

二、Features:

1. Using FUZZY PIDD control technology, it can automatically adapt to any heating model without setting parameters.
2. It has the function of preventing wrong connection of 380V input power supply, and the function of output short circuit protection to avoid damage to the controller.
3. The thermocouple protection function can automatically identify the heating wire and the thermocouple, so as to avoid damage to the thermocouple due to wrong input.
4. Heating wire output short-circuit protection, when the heating wire and the load are short-circuited, the output will be automatically turned off.
5. Automatic ambient temperature linear compensation, thermocouple automatic cold junction compensation.
6. Sensor error monitoring: It can detect the reverse and open circuit of the sensor, and act according to the type and mode of the error.

三、Protective function

Heater current monitoring. Temperature deviation alarm
Controller internal measurement loop number reconnaissance Temperature advance alarm
Output median check Software lock function
Leakage error detection circuit supports bumpless transmission
When a fault occurs, an error code is issued to display the cause of the fault

Temperature Control Box | Hot Runner Temperature Control Box | Injection Mold Hot Runner Temperature Control Box

Important technical features:

The wiring method can be changed according to customer needs and the high-quality power cable corresponding to the hot runner can be added
Different algorithms are used in different sections of temperature rise, so that the dynamic and steady state can be highly unified. It is especially suitable for high temperature, high heat sensitivity plastic materials, engineering plastics. It meets the requirements of high precision, and the interface is compatible with the international popular card interface. same and can be used interchangeably.

The plug-in temperature control box is available from 1 to 30 points, and orders above 30 points